Quick answer: Most surprise water bills come from a running toilet, an irrigation leak, or a dripping fixture. If those check out and your water meter still moves with everything off, the leak is hidden: in the yard line or under the slab. A 30-minute meter test tells you which.

First, compare like with like

Look at the same billing period last year, not just last month. Summer irrigation, house guests, and filling a pool all raise bills legitimately. In Rancho Palos Verdes, California Water Service bills show your usage, and the online account can show the trend over time.

A real red flag is a jump in a cool, wet month, when irrigation should be low. That points toward a leak rather than normal use.

The usual suspects, in order

  • Running toilet. A worn flapper can waste a large amount of water a day silently. Add a few drops of food coloring to the tank, wait 15 minutes without flushing, and see if color appears in the bowl.
  • Irrigation. A broken sprinkler head, a cracked lateral line, or a valve stuck open. Watch for soggy patches, and walk each zone while it runs.
  • Dripping faucets and shower heads. Small, but they add up.
  • Water softener or filter stuck in a regeneration or backwash cycle.
  • Pool or fountain auto-fill that keeps topping up a leaking pool.
  • Hidden leaks: the main service line from the meter, or a supply line under the slab.

The meter test that finds hidden leaks

  1. Turn off every fixture and appliance, and switch the irrigation controller off.
  2. Read the meter, including the small triangle or star-shaped leak indicator. Wait 30 minutes without using any water, and read it again.
  3. If it moved, close the main shut-off valve at the house and watch again.

Meter stops with the house valve closed: the leak is inside or under the house. If your toilets and fixtures check out, a slab leak is the likely cause.

Meter keeps moving with the house valve closed: the leak is between the meter and the house, in the main water line or an irrigation line upstream of the valve.

Why hidden leaks are common on the Peninsula

Much of Rancho Palos Verdes was built with copper supply lines cast into concrete slabs, and much of that copper is now 50 years old or more. The Peninsula's expansive clay soils also swell and shrink, slowly flexing slabs and buried lines. A pinhole leak under a slab can run for months without a visible puddle, because the water drains into the soil below the house.

What to do next

If the meter test points to a hidden leak, book professional leak detection before anyone digs or breaks concrete. Detection usually costs a few hundred dollars and keeps the repair small. See the cost guide for typical prices.

Keep your bills and meter readings. If the leak turns out to be under the slab, they help with an insurance claim. Some water utilities also offer a one-time leak adjustment once a leak is repaired, so ask Cal Water whether you qualify.

People Also Ask

Common questions

How much can a hidden leak add to a water bill?

It varies widely with the size of the leak and your water rates. Even a small, constant leak runs 24 hours a day, which is why bills can climb noticeably without any visible water.

How do I check my water meter for a leak?

Turn off all water use, then watch the meter's small leak indicator dial for 15 to 30 minutes. Any movement means water is flowing somewhere.

Can a slab leak cause a high water bill with no other signs?

Yes. Water can drain into the soil under the house for a long time before it shows up as a damp floor or warm spot.

Is the water company responsible for a leak?

Usually only on their side of the meter. Leaks on the house side, including the main line and under-slab plumbing, are typically the homeowner's responsibility.

Can I get a refund on my bill after fixing a leak?

Some utilities offer a one-time leak adjustment once you show the leak was repaired. Ask your water provider and keep your repair receipt.