Where the sound is coming from matters
Walk through the house when it is quiet, ideally at night, and note where the sound is loudest:
- Bathroom: a toilet slowly refilling every few minutes because of a leaky flapper.
- Kitchen or laundry: an ice maker, dishwasher, or washing machine valve that is not closing fully.
- Garage or utility area: a water softener in a cycle, or a water heater refilling.
- Outside wall: an irrigation valve that is stuck partly open.
- Inside a floor or wall with no fixtures nearby: the most worrying case, and a common slab leak sign.
Rule out the easy causes
- Toilets: put a few drops of food coloring in each tank. If color shows in the bowl within 15 minutes, the flapper is leaking.
- Appliances: close the small supply valves to the ice maker, dishwasher, and washer, and listen again.
- Irrigation: switch off the controller and close the irrigation shut-off valve if you have one.
- Water heater: close its cold-water inlet valve. If the sound stops, the leak is on the hot side.
Confirm it with your water meter
With everything off, watch the meter's leak indicator for 15 to 30 minutes. If it moves, water is escaping. Then close the main shut-off at the house: if the meter stops, the leak is inside or under the house; if it keeps moving, it is in the line from the meter.
A sound that stops when you close the water heater inlet, together with a moving meter, is a strong sign of a hot-water slab leak.
How professionals find the leak
Leak detection specialists use the same idea, but with far more sensitive equipment. Acoustic listening devices amplify the sound of water escaping under pressure through concrete, and the technician follows it to the loudest point. They usually confirm with a pressure test and, for hot-water leaks, thermal imaging, then mark the spot on the floor. Read more about slab leak detection.
Leak sound travels differently through thick slabs and the clay soils common on the Palos Verdes Peninsula, which is why an experienced technician confirms a reading with a second method before anything is opened.
When to call
If you have ruled out toilets, appliances, and irrigation, and the meter is moving, book leak detection. If you hear a strong rush of water, see water coming up, or the meter is spinning fast, shut off the main and call for emergency help.
Common questions
Why do I hear water running in my walls at night?
Night is when the house is quietest, so you hear what is always there. A toilet refilling, an appliance valve, or a leaking supply line in a wall or under the floor are the usual causes.
Can a slab leak make noise?
Yes. Water escaping from a pressurized line often makes a hiss or trickle that can be heard through the floor, especially near the leak.
Is a running-water sound dangerous?
The sound itself is not, but the leak behind it can waste water, damage flooring, and saturate soil under the foundation. It is worth tracking down promptly.
How do professionals pinpoint a leak by sound?
They use ground microphones and acoustic amplifiers to follow the sound of escaping water through concrete, then confirm with a pressure test or thermal imaging.
What if the sound stops when I close the main valve?
That means the sound is caused by water flowing in your plumbing. If it is not a toilet or appliance, a hidden leak is likely and professional detection is the next step.
