Quick answer: Stop the water if the leak is active, confirm it with your water meter, document everything, and book professional leak detection. Do not break concrete yourself, and do not wait weeks: slow leaks get more expensive and may stop being covered by insurance.

In the first 10 minutes

If water is visible, rising through the floor, or near electrical outlets:

  1. Shut off the main water valve, often where the line enters the house, near a front hose bib or in the garage. If you cannot find or turn it, use the meter shut-off at the street.
  2. Turn off the water heater (pilot or vacation setting for gas, the breaker for electric).
  3. Cut power to wet areas at the panel, without standing in water.
  4. Call for emergency slab leak help.

If there is no visible water, skip to the first hour.

In the first hour

  • Do a meter test: everything off, watch the leak indicator for 30 minutes, then close the house valve and watch again.
  • Check the hot side: close the water heater's cold-water inlet. If the meter stops, the leak is on a hot line.
  • Rule out toilets with a food coloring test.
  • Photograph the meter, any damp areas, and the floors.

In the first day

  • Book leak detection. A specialist can pinpoint the leak without breaking the floor. See what happens on a detection visit.
  • Call your insurer if anything got wet, and get a claim number. See what insurance usually covers.
  • Start drying: lift rugs, run fans and a dehumidifier.
  • If you must use water, keep the house valve off between uses, or keep only the cold side on if the leak is on the hot side.

In the first week

  • Get the detection report and a written repair estimate.
  • Compare a spot repair against a reroute, including flooring.
  • Check the cost guide so the quote makes sense.
  • Keep every receipt for your claim.

Mistakes that make slab leaks more expensive

  • Waiting. A small leak running for weeks means more drying, more flooring damage, and possible insurance problems.
  • Breaking concrete to look. Without detection, you may open the wrong spot and pay to restore two holes.
  • Throwing out damaged materials before the adjuster sees them.
  • Not knowing where your shut-off is. Find it today, and test that it turns. In older Peninsula homes, seized valves are common.
People Also Ask

Common questions

Should I turn off my water if I suspect a slab leak?

If water is visible or the meter is moving fast, yes: shut off the main. For a slow leak, you can turn it off between uses until it is repaired.

Can I keep living in the house with a slab leak?

Usually yes, with the water off between uses or the hot side isolated. If flooring or electrical areas are soaked, follow your insurer's and contractor's advice.

Should I break the concrete to find the leak?

No. Book professional leak detection first. It pinpoints the leak so only a small area, or nothing, has to be opened.

Who should I call first, a plumber or my insurer?

Stop the water first. Then call your insurer to open a claim and book leak detection, ideally the same day.

How fast should a slab leak be fixed?

As soon as practical: days, not weeks. Fast action limits damage and helps keep the loss sudden and accidental for insurance purposes.