Quick answer: The most reliable signs are a water meter that moves with every fixture off, an unexplained jump in your water bill, a warm or damp spot on the floor, and the sound of running water when nothing is on. One sign alone is a reason to test; two or more together are a reason to book leak detection.

The 8 warning signs

  1. Your water meter moves with everything off. The single best test. Any movement on the leak indicator means water is escaping.
  2. A higher water bill with no change in use, especially in a cool month. See the hidden leak checklist.
  3. A warm spot on tile, wood, or concrete that stays warm day and night. Read how to tell if a warm floor is a slab leak.
  4. Running water or hissing when every tap is off. See what that sound means.
  5. A water heater that never rests. A hot-water leak keeps it refilling and reheating. See water heater running constantly.
  6. Damp carpet, dark grout, or cupping hardwood away from bathrooms and the kitchen.
  7. New cracks in tile or the slab together with moisture. See cracked tile or damp floor.
  8. Lower water pressure throughout the house, or a musty smell near baseboards.

Which signs are urgent?

Treat it as an emergency and shut off the main water valve if you see water coming up through the floor, flooring lifting quickly, water near electrical outlets, or a meter that is spinning fast. Everything else, such as slow meter movement, a higher bill, or a faint warm spot, is not an emergency, but it is worth booking leak detection within days rather than weeks.

Confirm it in 30 minutes

  1. Turn off every faucet, appliance, and the irrigation controller.
  2. Note the reading and the leak indicator on your water meter, usually near the street.
  3. Wait 30 minutes without using water. If the meter moved, close the main shut-off valve at the house and check again.
  4. If it stops with the house valve closed, the leak is inside or under the house. Close the water heater's cold-water inlet: if the meter stops then, the leak is on the hot side.

Toilets are the most common non-slab culprit. Before blaming the slab, put food coloring in each tank and check the bowl after 15 minutes.

Why slab leaks are common in Rancho Palos Verdes

Many homes on the Peninsula were built between the 1950s and the 1970s with copper supply lines cast into slab-on-grade foundations. That copper is now 50 years old or more. Add expansive clay soils that slowly flex slabs, and pinhole leaks become common, often several on the same street within a few years.

What to do next

If your test points to a hidden leak, book professional leak detection before anyone breaks concrete. It usually pinpoints the leak within a few feet. Then compare a spot repair against a reroute, and check the cost guide for typical prices.

People Also Ask

Common questions

What is the most reliable sign of a slab leak?

A water meter that keeps moving with every fixture and the irrigation turned off. Combined with a dry toilet test, it strongly suggests a hidden leak.

Can you have a slab leak with no visible water?

Yes, often. Water can drain into the soil under the house for months before it shows up as a damp floor.

Can a slab leak cause a high water bill?

Yes. A pressurized leak runs around the clock, so even a small one can noticeably raise your bill.

Do slab leaks smell?

Sometimes. Long-running leaks can cause a musty smell from damp carpet pad, drywall, or mold near baseboards.

What should I do if I think I have a slab leak?

Do a meter test, rule out toilets, and book professional leak detection. If water is coming up through the floor, shut off the main valve and call right away.